DJI Spark Remote Controller
- Brand: DJI
- Product Code: SparkRemote
- Availability: In Stock
- Ex Tax:£107.50
DJI Spark Remote Controller
- Video transmission range of up to 2 km (1.2 mi).
- Top speed of up to 50 kph (31 mph) in Sport mode.
Spark's remote controller features a
brand new Wi-Fi signal transmission system, capable of controlling the
aircraft and gimbal camera at a maximum transmission range of 2km (1.2mi).
The remote controller can connect to a mobile device wirelessly and display a live video feed via DJI GO 4. Its folding clamps allow you to attach your mobile device securely. Maximum remote controller battery life is approximately 2.5 hours.
are some frequently asked questions from our customers and the
manufacturer, if you have a question please do not hesitate to contact us through the Zendesk chat, email, phone or in person.
I already have a spark, can I use this remote controller with my spark?
Yes, this remote controller can be used with all DJI Sparks.
I have a different colour spark, is this remote compatible?
Yes, all colours of the Spark drone are compatible with this remote controller
Can I use this controller with the Mavic Pro, Phantom series, or Inspire series?
No. This remote is compatible only with DJI Spark drones.
Can I use the Mavic Pro remote controller with the Spark?
How do I check the current remote controller's battery level?
Press the power button once.
How do I turn off the remote controller?
Press the power button, let go and then press and hold.
What buttons does the remote controller have?
On the front it has 2 joystick controls, pause, return to home and a sports mode switch.
On the left bumper it has video record and gimbal pitch dial.
On the right bumper it has take photo and a customisable programmable button.
What ports does it have?
Micro USB port for charging and DJI goggles.
How do I link the remote controller to the Spark?
Make sure both devices are within 20cm of each other.
Power both devices on.
Hold down the power button on the spark until you hear one beep the front LEDs should blink red.
Press and hold the flight pause button, the function button and the customisable button together, linking begins when the alarm becomes a quick single beep after an alternating single/double beep.
When the status LED on the remote controller turns solid green linking is complete.
Can I use the virtual joysticks on the mobile device when I have it synced up with the remote controller?
No, you will need to unlink the remote controller from the Spark to use the virtual joysticks.
How do I unlink the remote controller?
Hold the power button on the spark's battery for six seconds until hearing a double beep, this will disconnect the spark and the remote controller.
How long does it take to charge a depleted remote controller battery?
Around 1.5 hours.
|Max Transmitting Distance:||2.4 GHz: 2 km (1.2mi, FCC), 0.5km (0.31mi, CE), 0.5km (0.31mi, SRRC) 5.8 GHz: 2 km (1.2mi, FCC), 0.3km (0.19mi, CE), 1.2km (0.75mi, SRRC)|
|Operating Voltage:||950mA 3.7V|
|Supported Mobile Device Size:||Thickness: 6.5 mm-8.5 mm Max length: 160 mm|
|Operating Frequency:||2.412-2.462 GHz 5.745-5.825 GHz|
|Operating Temperature:||0°C to 40°C (32°F to 104°F)|
|Transmitter Power (EIRP):||2.4 GHz: 26 dbm (FCC), 18 dBm (CE), 18 dBm (SRRC) 5.8 GHz: 28 dbm (FCC), 14 dBm (CE), 26 dBm (SRRC)|