DJI Phantom 4 Pro V2.0
- Brand: DJI
- Product Code: P4ProV2.0
- Availability: Out Of Stock
- Ex Tax:£1,324.17
DJI no longer manufacture this product, the Mavic 2 Pro is a great alternative with newer technology and cheaper - find it here.
DJI Phantom 4 Pro V2.0
The Phantom 4 Pro V2.0 redefines the iconic Phantom series, bringing imaging and intelligence to new heights. Its new camera equipped with a larger 1-inch sensor and the ability to capture 4K video at 60fps and while its FlightAutonomy system adds dual rear vision sensors and two infrared sensors for a total of 5 directions of obstacle sensing and greater protection. Creators are also further empowered with a new suite of ActiveTrack and TapFly functions that makes complicated shots easier than ever.
Camera with 1-inch 20MP Sensor
The onboard camera has been redesigned to use a 1-inch 20-megapixel CMOS sensor. A custom engineered lens made up of eight elements is arranged in seven groups, it is the first DJI camera to use a mechanical shutter, eliminating rolling shutter distortion which can occur when taking images of fast moving subjects or when flying at high speed. In effect, it is as powerful as many traditional ground cameras. More powerful video processing supports H.264 4K videos at 60fps or H.265 4K at 30fps, both with a 100Mbps bitrate. Advanced sensors and processors ensure everything is captured with more image detail and the image data needed for advanced post-production.
5-Direction of Obstacle Sensing
FlightAutonomy is expanded with an additional set of high-resolution stereo vision sensors placed at the rear in addition to the pair placed at the front as well as infrared sensing systems placed on the left and right sides. This network creates a total of 5-direction of obstacle sensing and 4-direction of obstacle avoidance, protecting the Phantom 4 Pro V2.0 from more obstacles and giving filmmakers the confidence to capture more complex images.
OcuSync Remote Controller with Built-in Screen
A 5.5-inch 1080p screen integrated with the Phantom 4 Pro+ V2.0 controller offers 1000 cd/m2 of brightness, more than twice as bright as conventional smart devices. As the DJI GO app is built into the screen, hardware and software are fully optimized, allowing you to edit and share instantly. Along with the controller’s five-hour battery life and 4.3mi (7km) OcuSync transmission, the Phantom 4 Pro+ V2.0 is a complete aerial imaging solution.
New OcuSync Video Transmission
The Phantom 4 Pro V2.0’s remote controller uses OcuSync video transmission,* which employs time-division multiplexing technology to send control signal and receive video signal simultaneously. When the controller is powered on, the OcuSync system scans for the frequency band with lowest interference and switches accordingly to maintain clear transmission.Also, thanks to OcuSync, the Phantom 4 Pro V2.0 wirelessly connects to DJI Goggles RE. Free from cable constraints, you can enjoy exciting FPV flight at speeds of up to 72kph (45mph) in S-mode.
A 5.5in 1080p screen integrated with the Phantom 4 Pro+ V2.0 offers 1000 cd/m2 of brightness, more than twice as bright as conventional smart devices. It makes bright, vivid colours easily visible in direct sunlight. As the DJI GO 4 app is built into the screen, a mobile device is not required, simplifying pre-flight preparations. Integration of an HDMI port, Micro SD card slot, microphone, embedded loudspeaker, and Wi-Fi connection allow images to be edited inside DJI GO 4 to be shared almost instantly. Its five-hour battery life makes the Phantom 4 Pro+ V2.0 a complete aerial imaging solution.
See A Different World
The Phantom 4 Pro V2.0 wirelessly connects to DJI Goggles RE, putting you directly in the heart of the action with dual LTPS displays that offer a high-quality 1080p live camera view with an 85° FOV. Connected via OcuSync, users can experience fast and clear FPV flight with incredibly low latency.Plus, controlling your Phantom with DJI Goggles RE is more intuitive than ever. Just enable Head Tracking, which allows you to move the aircraft or gimbal simply by turning your head.
Draw is a brand new technology for waypoint control. Simply draw a route on screen and the Phantom 4 Pro V2.0 will move in that direction while keeping its altitude locked. This allows the pilot to focus on camera control and enables more complex shots. There are two Draw modes that can be used in different scenarios.
Standard: The aircraft follows the route at a constant speed with the camera facing in the direction of flight.
Free: The aircraft only moves along the route when instructed. In this mode, the camera can face in any direction during a flight.
The Phantom 4 Pro automatically recognizes subjects, follows and captures them as they move, making it easier to get complex shots.
Following fast-moving objects can be very challenging, but advanced image recognition algorithms used by the Phantom 4 Pro allow it to recognize and track the object while keeping it in frame. This new algorithm also recognizes more subjects, from people to vehicles to animals, and will adjust its flight dynamics to match, ensuring smoother shots.
Pilots can now choose between:
Trace – Follow behind or in front of a subject, avoiding obstacles automatically.
Profile – Fly alongside a subject at a variety of angles to get profile shots of the subject.
Spotlight – Keep the camera trained on a subject while the aircraft flies almost anywhere.
Fly in any direction visible on-screen with a simple tap. Tap anywhere on-screen to smoothly adjust the direction of flight while automatically avoiding obstacles * and tap the screen again or use control sticks to change direction. A new AR route function shows the aircraft’s real-time flight direction for reference as its route is adjusted. As it can be difficult to control altitude, course, speed and camera pitch simultaneously using joysticks, TapFly Free allows a pilot to set the direction of flight, allowing them to turn the Phantom 4 Pro V2.0 or tilt the gimbal as required without changing the direction of flight. In total, there are now three TapFly modes:
TapFly Forward – Tap to fly in the selected direction
TapFly Backward – Tap to fly in the opposite direction of the tap, i.e. tap in the bottom right corner of the screen to fly backward towards the top left.
TapFly Free – Lock the forward direction of the Phantom without locking the camera direction allowing it to turn as it flies.
*Obstacle Avoidance is not available with TapFly Free
Return to Home
In its upgraded Return to Home mode, the Phantom 4 Pro can automatically choose the best route to return home depending on environmental conditions. It records its route as it flies, allowing it to return along the same route avoiding obstacles if the control signal is disconnected.
Based on its altitude at the time of disconnection, the Phantom 4 Pro is also able to adjust its flight path to avoid obstacles it has seen during its flight. At takeoff, the Phantom 4 Pro will record the scene below and compare its recording with what it sees as it returns, for more precise landing. It can also detect the ground to see whether there is suitable spot for landing. If any obstacles are found, or there is water on the ground, it will alert the pilot and hover at an appropriate height, helping the aircraft to land more safely.
Using Gesture Mode, selfies can be captured easily using a few gestures without the remote controller. Advanced computer vision technology allows the Phantom 4 Pro to take instructions through gestures. The subject simply lifts their arms when facing the camera and the aircraft will recognize this movement by locking on and placing the subject in the center of the frame. When ready for a photo, the subject holds their arms out to signal the aircraft. A three second countdown will begin, making time to strike a pose, allowing moments to be captured without the remote control.
Aircraft Body x1
Remote Control* x1
Propeller Pairs x4
Intelligent Flight Battery x1
Battery Charger x1
Power Cable x1
Gimbal Clamp x1
Micro SD Card 16GB x1
Micro USB Cable x1
Carrying Case x1
*Phantom 4 Pro Plus V2.0 comes with a remote control with a built-in screen.
What are the main similarities and differences between the Phantom 4 Pro V2.0 and Phantom 4 Pro?
The Phantom 4 Pro V2.0 uses the same camera as the Phantom 4 Pro and is equipped with a 1-inch 20-megapixel sensor capable of shooting 4K/60fps video at 100Mbps. Also, like the Phantom 4 Pro, V2.0 features a 30-minute maximum flight time and 7-kilometer long-range control. The remote controller of the Phantom 4 Pro V2.0 also supports 2.4 and 5.8GHz frequency switching, and a remote controller a with built-in screen is also available. Different from the Phantom 4 Pro, the Phantom 4 Pro V2.0 is equipped with an OcuSync transmission system, which allows the drone to connect to DJI Goggles wirelessly. The Phantom 4 Pro V2.0 also features an upgraded propulsion system with FOC sinusoidal driver ESCs and 9455S quick-release propellers that reduce noise and make the drone more aerodynamic. *The remote controller of Phantom 4 Pro V2.0 is not compatible with the Phantom 4 Pro, which uses Lightbridge transmission. Other accessories such as batteries, chargers, and ND filters are compatible with both the Phantom 4 Pro and Phantom 4 Pro V2.0.
What, if any, are the main differences between the Phantom 4 Pro V2.0 and Phantom 4 Pro Obsidian?
The Phantom 4 Pro Obsidian comes in a matte black casing. Functionally, the Phantom 4 Pro Obsidian is the same as the Phantom 4 Pro. As such, the main differences between the Phantom 4 Pro Obsidian and Phantom 4 Pro V2.0 are mentioned in question 1.
Which Micro SD cards are supported?
Currently supported Micro SD cards are:
Sandisk Extreme 32GB UHS-3 V30 MicroSDHC
Sandisk Extreme 64GB UHS-3 V30 MicroSDXC
Panasonic 32GB UHS-3 MicroSDHC
Panasonic 64GB UHS-3 MicroSDXC
Samsung PRO 32GB UHS-1 MicroSDHC
Samsung PRO 64GB UHS-3 MicroSDXC
Samsung PRO 128GB UHS-3 MicroSDXC
*It's not recommend to use the Patriot EPPRO 64GB MicroSDXC UHS-3.
Will the Phantom 4 Pro V2.0 have an Obsidian version in the future?
What are some key features of the Phantom 4 Pro V2.0’s camera?
The Phantom 4 Pro V2.0 camera is still equipped with a 1-inch 20-megapixel sensor and has a manually adjustable aperture from F2.8 to F11. It also supports autofocus by half-pressing the Shutter button and has a focus range from 1m to infinity. Always refocus before capturing additional shots if the subject has moved beyond the focus point. Focus at infinity if the subject is over 98ft (30m) away. Refocusing is also needed when switching from close shots to long shots during recording.
What advantages does the Phantom 4 Pro V2.0 have for shooting video?
The Phantom 4 Pro V2.0 can record UHD 4K (4096×2160) at 60fps, at a maximum bitrate of 100Mbps using the H.264 codec and also supports H.265. It also allows you to capture still images while filming.
What is the resolution and format of photos captured while recording video?
Photos will be captured as JPEG in the same resolution as the video recording.
What is the advantage using the new H.265 video format?
H.265 retains 50% more information than H.264, creating more detailed and vivid images.
What’s the benefit of having a mechanical shutter?
An electronic shutter may cause artifacts and distortion, such as jello, when shooting fast moving objects. A mechanical shutter prevents this and guarantees a high-quality image.
Does the Phantom 4 Pro V2.0 support focus adjustment?
Yes. Tap a point on the display to focus at that point after switching from Metering to Focus mode. Autofocus can also be triggered by half-pressing the Shutter button before fully pressing the button to capture an image. Focus can be set between 1m and infinity.
What are the main features of the Phantom 4 Pro V2.0 camera lens?
The Phantom 4 Pro V2.0 uses a camera lens optimized for aerial imaging, with an aperture range from F2.8 to F11 and a 24mm equivalent focal length. It’s equipped with a mechanical shutter and adjustable aperture range, with autofocus support.
OBSTACLE SENSING SYSTEM
When does the infrared sensing system work during flight?
Only in Beginner mode and Tripod mode.
How does the infrared sensing system work?
Available in Beginner Mode and Tripod Mode only, the infrared sensing system has a sensing field with a 70° angle horizontally and 20° angle vertically. The radiated infrared light is reflected back by obstacles, allowing the sensors to “see” them at a distance of up to 23ft (7m) by calculating the difference in projection and reflection times and using this information to create a 3D model of the environment and obstacles in it.
How does the Phantom 4 Pro V2.0’s obstacle sensing system work?
The Phantom 4 Pro V2.0 uses the same obstacle sensing system as the Phantom 4 Pro. Phantom 4 Pro V2.0’s maximum forward obstacle sensing range has been extended to 98ft (30m), with the rear sensing system sharing the same capability. Additionally, the Phantom 4 Pro V2.0 is equipped with infrared sensors on both sides of the aircraft, precisely detecting the distance between the aircraft and obstacles within a range of up to 23ft (7m).
Is there any difference between the front and rear obstacle sensing systems?
Is the remote controller of Phantom 4 Pro V2.0 compatible with that of Phantom 4 Pro?
No. The remote controller of Phantom 4 Pro V2.0 cannot be used with other Phantom series drones.
What’s new about the Phantom 4 Pro V2.0 remote controller?
The Phantom 4 Pro V2.0 remote controller is equipped with an OcuSync transmission system and can be connected to DJI Goggles wirelessly for immersive FPV flight at up to 72 kph in S-mode.
The Phantom 4 Pro V2.0 is compatible with two remote controller types: the standard version and the built-in screen version. Both can switch between 2.4GHz and 5.8GHz frequency bands with a maximum controllable range of 4.3mi (7km) (unobstructed, free of interference, FCC compliant), and both can focus by half-pressing the shutter release button.
The Phantom 4 Pro+ controller has a 5.5-inch 1080p display, with 1000 cd/m2 brightness and built-in DJI GO 4 app. Its remote controller is also equipped with an HDMI port, Micro SD slot, microphone, loudspeaker, and Wi-Fi connectivity.
Can I detach the integrated display from the Phantom 4 Pro+ V2.0 remote controller?
Can I connect an iOS device or Android device to the Phantom 4 Pro+ V2.0 remote controller to use DJI GO 4?
Does the Phantom 4 Pro + V2.0 remote controller have a built-in loudspeaker and microphone?
What is the resolution of the Phantom 4 Pro +V2.0 remote controller display?
What apps are preloaded on the Phantom 4 Pro + V2.0 screen remote controller display?
Popular social media apps and DJI GO 4.
What operating system does the Phantom 4 Pro +V2.0 remote controller display use?
It uses a customized DJI system.
Is the remote controller’s screen display’s brightness adjusted automatically or manually?
Can I download other apps onto the Phantom 4 Pro + V2.0 remote controller display?
Users can install third-party apps when the Phantom 4 Pro+ V2.0 remote controller is updated to the latest firmware version.
Does the Phantom 4 Pro + V2.0 remote controller support Wi-Fi and Bluetooth connectivity?
It supports Wi-Fi but not Bluetooth.
What Intelligent Flight Modes are on the Phantom 4 Pro V2.0?
The Phantom 4 Pro V2.0 features Intelligent Flight Modes such as TapFly, ActiveTrack, Draw, Gesture, Tripod, and more.
How has the Phantom 4 Pro V2.0’s Return to Home function been improved?
The Phantom 4 Pro V2.0’s Return to Home function forms a map of its environment in real time. The aircraft will choose the best flight path to return home and senses as far as 300m away to avoid obstacles more effectively. If the control signal is lost, the Phantom 4 Pro V2.0 will retrace its original path to regain its connection after one minute. When it reconnects, it will return to home following a straight route. If it fails to regain connection, it will also revert to straight line RTH.
How do I use Narrow Sensing?
First, set C1 or C2 to activate Narrow Sensing. When flying in a narrow space, activate Narrow Sensing, and the aircraft will adjust its sensing range and flight speed to fly safely through narrows gaps.
Can use I Phantom 4 Pro propellers on the Phantom 4 Pro V2.0?
Yes. Phantom 4 Pro V2.0 and Phantom 4 Pro propellers are cross-compatible. However, Phantom 4 Pro propellers (9450S) are less aerodynamic and louder than Phantom 4 Pro V2.0 propellers (9455S propellers).
How has the Phantom 4 Pro V2.0’s propulsion system been optimized?
New FOC sinusoidal driver ESCs not only reduce electromagnetic noise, but also improve the overall efficiency of the ESCs. Also, new 9455S quick-release propellers make the Phantom 4 Pro V2.0 more aerodynamic and reduce noise. It has the same maximum flight time and maximum speed as the Phantom 4 Pro.
VIDEO TRANSMISSION SYSTEM
What is the difference between the Phantom 4 Pro V2.0 and Phantom 4 Pro’s video transmission system?
The Phantom 4 Pro V2.0 uses an OcuSync video transmission system and time division multiplexer that supports uploading remote control signal and receiving video transmission signal in the same frequency band. The Phantom 4 Pro uses a Lightbridge video transmission system.
Both drones have a transmission distance of up to 4.3 mi (7km), and users can switch between 2.4 and 5.8GHz control frequencies to improve signal stability and cut through interference.
BATTERIES and BATTERY CHARGER
Are the Phantom 4 Pro V2.0 batteries and battery charger compatible with the Phantom 4?
What is the capacity of the Phantom 4 Pro V2.0 battery? How much has the flight time been extended compared to the Phantom 4?
The battery capacity is 5870mAh. It flies for two additional minutes compared to the Phantom 4.
During updating, if the battery level of the aircraft battery or controller battery drops below 50%, will the update process fail?
Yes. Always use a battery with more than 50% power when upgrading.
What if battery firmware is not consistent with the updated aircraft?
Use DJI GO 4 to update the battery firmware to the appropriate version.
What is the difference between updating the firmware on the Phantom 4 Pro V2.0 and Phantom 4 Pro?
When updating firmware with the DJI GO 4 app for Phantom 4 Pro V2.0, confirm that the remote controller and aircraft are connected. Then download the firmware for the update following the prompts in the app. No OTG cable is required, unlike with the Phantom 4 Pro. Please refer to the instructions below when using DJI Assistant 2 to update. 1. To update the remote controller only: Power off the aircraft and connect the remote controller to your computer via USB. 2. To update the aircraft only: Connect the aircraft to your computer via USB. 3. To update the aircraft and remote controller together: Power on the aircraft and link it to the remote controller then connect the remote controller to the computer via USB; Once the aircraft and remote controller are connected to your computer, DJI Assistant 2 will respond to the device that was connected first.
|Diagonal Size (Excluding Propellers):||350 mm|
|Weight (Including Battery And Propellers):||1375 g|
|Max Ascent Speed:||S-mode: 6 m/s; P-mode: 5 m/s|
|Max Descent Speed:||S-mode: 4 m/s; P-mode: 3 m/s|
|Hover Accuracy:||Vertical: ±0.1 m (With Vision Positioning); ±0.5 m (With GPS Positioning) Horizontal: ±0.3 m (With Vision Positioning); ±1.5 m (With GPS Positioning)|
|Max Speed:||S-mode: 45 mph (72 kph); A-mode: 36 mph (58 kph); P-mode: 31 mph (50 kph);|
|Max Altitude Above Sea Level:||6000m (19685 feet)|
|Operating Temperature:||0° to 40°C (32° to 104°F)|
|Max Angular Velocity:||S-mode: 250°/s; A-mode: 150°/s|
|Max Tilt Angle:||S-mode: 42°; A-mode: 35°; P-mode: 25°|
|Max Wind Speed Resistance:||10 m/s|
|Max Flight Time:||Approx. 30 minutes|
|Max Transmitting Distance:||2.400 - 2.483 GHz (Unobstructed, free of interference) FCC: 4.3 mi (7 km) CE: 2.5 mi (4 km) SRRC: 2.5 mi (4 km) 5.725 - 5.850 GHz (Unobstructed, free of interference) FCC: 4.3 mi (7 km) CE: 1.2 mi (2 km) SRRC: 3.1 mi (5 km)|
|Operating Temperature Range:||0° to 40°C (32° to 104°F)|
|Operating Voltage:||1.2 A @7.4 V|
|Remote Controller Battery:||6000mAh LiPo 2S|
|Video Output:||GL300K: HDMI GL300L: USB|
|Operating Frequency:||2.400 - 2.483 GHz and 5.725 - 5.850 GHz|
|Mobile Device Holder:||GL300K: Built-in display device (5.5 inch screen, 1920×1080, 1000 cd/m2, Android system, 4 GB RAM＋16 GB ROM) GL300L: Tablets and smart phones|
|Transmitter Power (EIRP):||2.400 - 2.483 GHz FCC: 26 dBm CE: 20 dBm SRRC: 20 dBm MIC: 17 dBm 5.725 - 5.850 GHz FCC: 26 dBm CE: 14 dBm SRRC: 20 dBm MIC: -|
|Battery Type:||LiPo 4S|
|Charging Temperature:||5° to 40°C (41° to 104°F)|
|Max Charging Power:||100W|
|Electronic Shutter Speed:||8 - 1/8000 s|
|Max Image Size:||3:2 Aspect Ratio: 5472 × 3648 4:3 Aspect Ratio: 4864 × 3648 16:9 Aspect Ratio: 5472 × 3078|
|Max Video Bitrate:||100 Mbps|
|Mechanical Shutter:||8 - 1/2000 s|
|Operating Temperature :||0° to 40° C (32° to 104° F)|
|Photo Formats:||JPEG, DNG (RAW), JPEG + DNG|
|PIV Image Size:||・4096 × 2160 (4096 × 2160 24/25/30/48/50p) ・3840 × 2160 (3840 × 2160 24/25/30/48/50/60p) ・2720 × 1530 (2720 × 1530 24/25/30/48/50/60p) ・1920 × 1080 (1920 × 1080 24/25/30/48/50/60/120p) ・1280 × 720 (1280 × 720 24/25/30/48/50/60/120p)|
|Supported File Systems:||FAT32 (≤ 32 GB); exFAT (> 32 GB)|
|Video Formats:||MP4/MOV (AVC/H.264；HEVC/H.265)|
|Sensor:||1’’ CMOS; Effective pixels: 20M|
|Lens:||FOV (Field of View) 84°, 8.8 mm / 24 mm (35 mm format equivalent), f/2.8 - f/11. auto focus at 1 m - ∞|
|ISO Range:||Video: 100 - 3200 (Auto); 100 - 6400 (Manual) Photo: 100 - 3200 (Auto); 100- 12800 (Manual)|
|Still Photography Modes:||Single Shot Burst Shooting: 3/5/7/10/14 frames Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7EV Bias Interval: 2/3/5/7/10/15/30/60 s|
|Video Recording Modes:||H.265 ・C4K：4096×2160 24/25/30p @100Mbps ・4K：3840×2160 24/25/30p @100Mbps ・2.7K：2720×1530 24/25/30p @65Mbps 2720×1530 48/50/60p @80Mbps ・FHD：1920×1080 24/25/30p @50Mbps 1920×1080 48/50/60p @65Mbps 1920×1080 120p @100Mbps ・HD： 1280×720 24/25/30p @25Mbps 1280×720 48/50/60p @35Mbps 1280×720 120p @60Mbps H.264 ・C4K：4096×2160 24/25/30/48/50/60p @100Mbps ・4K：3840×2160 24/25/30/48/50/60p @100Mbps ・2.7K：2720×1530 24/25/30p @80Mbps 2720×1530 48/50/60p @100Mbps ・FHD：1920×1080 24/25/30p @60Mbps 1920×1080 48/50/60 @80Mbps 1920×1080 120p @100Mbps ・HD： 1280×720 24/25/30p @30Mbps 1280×720 48/50/60p @45Mbps 1280×720 120p @80Mbps|
|Supported SD Card Types:||Micro SD, Max Capacity: 128GB. Write speed ≥15MB/s, class 10 or UHS-1 rating required|
|Control Angle Accuracy:||±0.02°|
|Controllable Range:||Pitch: -90° to +30°|
|Stabilization:||3-axis (pitch, roll, yaw)|
|Max Controllable Speed:||Pitch: 90°/s|
|App / Live View|
|Mobile App:||DJI GO 4|
|Live View Working Frequency:||2.4 GHz ISM, 5.8 GHz ISM|
|Live View Quality:||720P @ 30fps, 1080P @ 30fps|
|Latency:||Phantom 4 Pro V2.0: 220 ms (depending on conditions and mobile device) Phantom 4 Pro + V2.0：160 - 180 ms|
|Required Operating Systems:||iOS 9.0 or later Android 4.4.0 or later|
|Recommended Devices:||iOS:iPhone 5s, iPhone SE, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPad Air, iPad Air Wi-Fi + Cellular, iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, iPad mini 3 Wi-Fi + Cellular, iPad mini 4 and iPad mini 4 Wi-Fi + Cellular. This app is optimized for iPhone 7, iPhone 7 Plus. Android:Samsung S7 edge, Samsung S7, Samsung S6, Samsung S5, Samsung NOTE4, Samsung NOTE3, Samsung tabs 705c, Ascend Mate 9, Ascend Mate 7, Huawei Honor 8, Huawei P8 Max, Vivo X7, Xiaomi 5, MI 3, Google Nexus 6p, Nexus 9, Google Nexus 7 II, LG V20, Sony Xperia Z3, Smartisan T1.|
|Infrared Sensing System|
|Detection Frequency:||10 Hz|
|FOV:||70° (Horizontal), ±10° (Vertical)|
|Obstacle Sensory Range:||0.2 – 7 m (0.6 – 23 ft)|
|Operating Environment:||Surface with diffuse reflection material, and reflectivity > 8% (such as wall, trees, humans, etc.)|
|Obstacle Sensory Range :||0.7 – 30m (2 – 98 ft)|
|Altitude Range:||0 – 10m (0 – 33 ft)|
|Operating Range:||0 – 10m (0 – 33 ft)|
|Operating Environment:||Surfaces with clear patterns and adequate lighting (> 15 lux)|
|Velocity Range:||≤50 kph (31 mph) at 2 m (6.6 ft) above ground|
|Rated Power:||100 W|